TC-M Series Whole-House Water Conditioner System
The TC-M Series water conditioning system softens, clarifies, and polishes your water to give you an abundant supply of luxuriously-conditioned water throughout your home. An electronic, meter-driven control manages the entire operating program. It’s versatile, easy-to-use and delivers an abundance of conditioned water.
Demand-Initiated Regeneration. A simple yet versatile meter control calculates the system regeneration based on actual water usage.
• Exclusive Composite Valve
• Demand-Initiated Regeneration
• Powerful High Torque DC Motor
• Automatic Bypass During Regeneration
• Optional Activated Carbon
• Tank-Within-A-Tank Construction
TC-M Series Features:
Exclusive Composite Valve
Uses advanced composite materials to enhance strength and protect the valve from expansion or shrinkage due to pressure and temperature demands.
Demand-Initiated Regeneration
A simple yet versatile meter control calculates the system regeneration based on actual water usage.
Power Outage Recovery. If power is lost, the TC-M Series will automatically recover and complete the process once power is restored. This feature ensures that all scheduled regeneration cycles are never missed and that soft water is always available.
Powerful High Torque DC Motor A DC motor
uses less electricity than convention AC motors.
Automatic Bypass During Regeneration
There is no chance of being without water during the regeneration process.
Conditioning Resin The resin possesses an extremely high conditioning capacity and resistance to bead breakage.
Optional Activated Carbon
Specially-graded and treated activated carbon clarifies and polishes your water.
Tank-Within-A-Tank Construction
Rugged tank is wound with miles of glass filament for extraordinary strength. Inside, there’s another tank of sanitary plastic so your drinking water will never touch the interior fiberglass surface.
Other Benefits
• All high-strength enclosures fit tightly to protect control
components from outside elements.
• Brine tank is equipped with overflow protection to
protect against overflow due to power outages during
regeneration.
How the TC-M Series Works
Step 1: Water enters RainSoft’s exclusive rugged control valve and flows down through the resin tank. Step 2: The water is filtered and treated as it passes through the special “ion exchange” resin. Hardness ions are ionically retained both in and on the resin. The optional carbon bed further polishes and clarifies the water. Step 3: Once completely conditioned, the water exits the resin tank through the riser pipe and out the control valve. Step 4: At precise intervals, the unit begins a regeneration process. Using salt as a regenerant, the hardness ions are flushed out of the system and down the drain. The unit then prepares itself for the next conditioning cycle. |